News Center

Home page

News
- Company news
- Industry news

2022

2022-08-19

What are the main applications of ferrite magnetic materials?

Ferrite is divided into soft ferrite and permanent ferrite. soft ferrite There are manganese ferrite (MnO Fe2O3), zinc ferrite (ZnO Fe2O3), nickel zinc ferrite (Ni-Zn Fe2O4), manganese magnesium zinc ferrite (Mn-Mg-Zn Fe2O4), etc. One-component or multi-component ferrites. The resistivity is much larger than that of metal magnetic materials, and it has higher dielectric properties, so ferrites with both ferromagnetism and ferroelectricity as well as ferromagnetism and piezoelectricity appear. It has a much higher magnetic permeability than metal magnetic materials (including iron-nickel alloys, aluminum-silicon-iron alloys) at high frequencies, and is suitable for working at frequencies from several kilohertz to several hundred megahertz. Processing ferrite belongs to the general ceramic process, so the process is simple, and a lot of precious metals are saved, and the cost is low. The saturation magnetic flux density Bs of ferrite is low, usually only 1/3 to 1/5 of iron. The low magnetic energy stored in the unit volume of ferrite limits its application in low frequency, high power and high power fields that require higher magnetic energy density. It is more suitable for high frequency, low power, and weak current applications. Nickel-zinc ferrites can be used as antenna rods and intermediate frequency transformer cores in radios, and manganese-zinc ferrites can be used as line output transformer cores in TV receivers. In addition, soft ferrite is also used in inductors and filter cores in communication lines. In recent years, it has also been used as a high-frequency magnetic recording transducer (magnetic head). Permanent magnet with barium ferrite (BaO·6Fe2O3) and strontium ferrite (SrO·6Fe2O3). It has high resistivity and belongs to the semiconductor type, so the eddy current loss is small and the coercive force is large. It can be effectively used in the magnetic circuit of the large air gap, and is especially suitable for the permanent magnet of small generators and motors. It does not contain precious metals such as nickel and cobalt, has abundant raw material sources, uncomplicated process and low cost, and can replace AlNiCo permanent magnets. Its maximum magnetic energy product (B+H)m is lower, so it is larger than metal magnets under the same magnetic energy. Its temperature stability is poor, its texture is brittle and fragile, and it is not resistant to shock and vibration. It is not suitable for measuring instruments and magnetic devices with precision requirements. Permanent magnet ferrite products are mainly anisotropic series. They can be used to make permanent magnet ignition motors, permanent magnet motors, permanent magnet concentrators, permanent magnet lifting heads, magnetic thrust bearings, magnetic separators, speakers, microwave devices, magnetic therapy tablets, hearing aids, etc.

2022

2022-08-19

Development trend of soft ferrite materials of soft ferrite materials

Now soft ferrite products, high-tech applications account for 22%, such as digital communication, electromagnetic compatibility (EMC), radio frequency broadband, anti-electromagnetic interference (EMI), high-definition display, automotive electronics. The traditional medium and low-end product fields account for 78%, such as TV sets, power adapters, electronic ballasts, ordinary switching power supply transformers, and antenna rods.

2022

2022-08-19

What are the main types of inductors? The structure and classification of inductors

In order to strengthen electromagnetic induction, people often wind the insulated wire into a coil with a certain number of turns. Inductors are also called chokes, reactors, and dynamic reactors. Inductance (inductance coil) is an electromagnetic induction element wound with insulated wires (such as enameled wire, yarn-covered wire, etc.), and is also one of the commonly used components in electronic circuits.

< 1 > proceed page